Dp Sensor piezoresistive pressure sensor differential pressure sensor transmitter PC10d ISO9001 CE RoHS

Features:Piezoresistive silicon chip employedPerfect long term stabilityMEMS TechnologySensor diameter: 19mmProducts Overviews:PC10D(WTD19) differential pressure sensor is a standard and most popular sensor applied in air and liquid pressure measuring. A high sensitivity silicon pressure chip is employed in the sensor. The housi

Featured Products

Features:
Piezoresistive silicon chip employed
Perfect long term stability
MEMS Technology
Sensor diameter: 19mm


Products Overviews:
PC10D(WTD19) differential pressure sensor is a standard and most popular sensor applied in air and liquid pressure measuring. A high sensitivity silicon pressure chip is employed in the sensor. The housing is filled with oil for pressure transmission. The most important specification for industry application is long term stability. PC10D(WTD19) sensor is designed for industry application with perfect long term stability.

Diaphragm and pressure range
The diaphragm diameter has tight relation with pressure measured. Low pressure requires large diameter and high pressure needs small diameter. This is caused by oil expansion during temperature changing. It creates internal pressure due to the resistance of the diaphragm. The smaller diaphragm will create large internal pressure, and it is difficult to make zero compensation.
 
Pressure range
 
Pressure range10kPa, 35kPa, 70kPa, 100kPa, 250kPa, 400kPa, 600kPa, 1MPa, 1.6MPa, 2.5MPa(bar and psi unit available)
Pressure referenceDifferential pressure
OverpressureRangePositive OverpressureNegative Overpressure
35kPa70kPa35kPa
70kPa150kPa70kPa
100kPa200kPa100kPa
250kPa500kPa250kPa
400kPa800kPa400kPa
600kPa1200kPa600kPa
1MPa2MPa1MPa
1.6MPa3.2MPa1MPa
2.5MPa5MPa1MPa
Output signal
 
Zero output±2mV
Span output≥40mV (≤35kPa) | ≥60mV (Other ranges)
Specification
 
Accuracy (linearity, repeatability and hysteresis)±0.25%F.S. (Typical)
Excitation1.5mA (Typical)
Compensated temp.0ºC-60ºC (≤35kPa) | -10ºC-70ºC (Other ranges)
Operating temp.-40ºC-125ºC
Storage temp.-40ºC-125ºC
Zero temp. coefficient 0.02%F.S./ºC (≥100kPa) | 0.04%F.S./ºC(<100kPa)
Span temp. coefficient0.02%F.S./ºC(≥100kPa) | 0.04%F.S./ºC(<100kPa)
Insulation resistance>200Mohm/250VDC
Input impedance2kΩ~5kΩ
Long term stability≤0.3%F.S.S/year
Vibration20g (20-5000HZ)
Housing and diaphragmStainless steel 316L
Oil fillingSilicon oil (Typical)
Wire connection4 wire (typical) | 5 wire (available)    39×φ0.015, Silicon shielded, 200ºC bearing
Weight40g(approx)
Wire connection
                                                

Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHS
        
How to order
 
Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHS
Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHSAbout Us:
Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHS
Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHS
Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHS

Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHSDp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHS
Certifications:
Dp Sensor Piezoresistive Pressure Sensor Differential Pressure Sensor Transmitter PC10d ISO9001 CE RoHS




FAQ:
1.    Q: Are you manufacturer or trading company?
        A: We are manufacturer which focuses on pressure sensor, pressure gauge and level sensor for 33 years.
2.    Q: What international certificates do you have?
        A: ISO9001, CE, RoHS Certificated.
3.    Q: What is your production capacity?
        A: We produced 2000000 pieces pressure sensor since year 2017.
4.    Q: What is the lead time of your product?
        A: Stocks are available for some products. The typical lead time is 6~14 working days for product without customization. 
       Note: lead time may vary base on different products. Please contact us for detailed lead time. 
5.    Q: What is the warranty of your products?
       A: Our warranty time is 18 months after shipment.
6.    Q: Do you provide customized products?
       A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.

                                          
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours