JC660-10 Vacuum Anti-Explosion Pressure Transducer Overview:
JC660-10 vacuum anti-explosion pressure transducer is specially designed for high-explosion dangerous site. It can provide stable and accurate measurement at an absolute pressure, gauge pressure and differential pressure of liquid or gas medium from -100KPa to 200MPa. It welds the existing multi -crystalline silicon film sensing element of HELM with the enclosure using welding technology and can be customized rapidly according to the regulations to meet the individualized needs of different users. With built-in amplification circuit and diversified structural forms, it can be equipped with M 20 x 1.5 or G1 / 2 internal thread explosion-proof flexible tube connector. Featured by good performance, small size and flexible design, JC660 anti-explosive pressure transducer/sensor has the advantages of a very high ratio of performance to cost and long service life compared with traditional explosion-proof transducers. It is widely used in oilfield, mining well, chemical, electric power, boiler, natural gas and other fields.
JC660-E type pressure transducer is an intrinsically safe explosion-proof pressure transducer, with explosion- proof marking of Ex iaII CT6 and explosion-proof conformity certificate number of CNEx07.0988. It boasts stable and reliable performance supporting the use of repetitive-use type safety energy limiter or safety barrier.
JC660-D type pressure transducer is a flameproof pressure transducer, with explosion-proof marking of Ex dIICT6 and explosion-proof conformity certificate number of CNEx08.2405. JC660-ED type is an intrinsically safe flameproof pressure transducer, with explosion -proof marking of Ex iaII CT6 and Ex dII CT6. It is safe and reliable and simple and convenient to operate, without the installation of safety barrier when installed and used.
JC660-10 Vacuum Anti-Explosion Pressure Transducer Features:
* Intrinsically safe and flameproof certification: Ex iaII CT6, Ex dII CT6
* Measuring range: -100KPa~0~200Pa...100KPa...200MPa
* Gauge pressure, absolute pressure and differential pressure are available
* Explosion - proof design, safe and reliable
* Adoption of explosion-proof genuine HELM multi - crystalline silicon film chip, with stable and reliable performance and long service life
* Reverse polarity and over-voltage protection of power supply
* Strong anti-interference and immunity to vibration and excellent long -term stability
Technical Parameters:
| Measuring range | -100KPa~0~200Pa...5KPa...200MPa | ||
| Overload capacity | Two times FS pressure (1.1 times FS pressure for 100MPa product) | ||
| Pressure type | Gauge pressure, absolute pressure, differential pressure | ||
| Measured medium | Gas or liquid compatible with 316 stainless steel | ||
| Overall accuracy(Non-linearity, repeatability, lagging) | ±0.1%FS | ±0.25%FS | ±0.5%FS |
| Long-term stability | Typical: ±0.1%FS/ year | ||
| Zero point temperature drift | Typical: ±0.02%FS/ºC | ||
| Sensitivity temperature drift | Typical: ±0.02%FS/ºC | ||
| Operating temperature | -20 ~ 85ºC | ||
| Compensation temperature | -20 ~ 60ºC | ||
| Range of power supply | 12~36VDC (24VDC generally) | ||
| Signal output | 4~20mA/1~5VDC/0~5VDC | ||
| Load resistance | ≤(U-12)/0.02 Ω | ||
| Insulation resistance | ≥2000MΩ(testing condition100VDC) | ||
| Resolution | Infinite small (theoretical) 1 / 100000 (general) | ||
| Response time | ≤1 ms | ||
| Influence of vibration | Within mechanical vibration frequency 20Hz ~ 1000Hz, change of output is less than 0.1% FS | ||
| Weight | Approx. 0.5kg | ||
Ordering Information:
| JC660-10 | Vacuum Anti-Explosion Pressure Transducer | |||||
| Pressure type | Gauge pressure; absolute pressure (A); differential pressure (D) | |||||
| Range | (0~ X MPa) Measuring range | |||||
| Code | Overall accuracy (linearity + repeatability + lagging) | |||||
| 1 | ±0.5%FS | |||||
| 2 | ±0.25%FS | |||||
| 3 | ±0.1%FS | |||||
| Code | Signal Output | |||||
| A1 | 4~20mA | |||||
| V1 | 1~5V DC | |||||
| V2 | 0~5V DC | |||||
| V3 | 0.5~4.5V DC | |||||
| Code | Additional functions | |||||
| F1 | M20x1.5 external thread | |||||
| F2 | G1/4 external thread | |||||
| F0 | Special | |||||
| W1 | Cable type (IP67, 2m) | |||||
| W2 | HSM socket type (IP65, DIN43650) | |||||
| W3 | Outline drawing (I) | |||||
| W4 | Outline drawing (II) | |||||
| W0 | Special | |||||
| L1 | Pointer scale (0 ~ 100%) display | |||||
| L2 | 4LCD display | |||||
| L3 | 4LED display | |||||
| P | Flush diaphragm | |||||
| E | Intrinsically safe Ex iaII CT5 | |||||
| D | Flameproof Ex dII CT6 | |||||
| JC660-10 -1 -A1 -F1 -W3 -D Vacuum Anti-Explosion Pressure Transducer | ||||||
Tips for Type Selection
* The measured medium shall be compatible with the material contacting with the product.
* The code E, an additional function code for selection, namely, intrinsically safe explosion-proof Ex iaIICT6 must be power supplied via safety barrier.
* The code D, an additional functional code for selection, namely, flameproof Ex dIICT6 is preferably provided with explosion-proof flexible hose for the electrical power cable connected at the rear side.
* The options W1 and W2 are general structural encapsulation and only used for HM60 -E intrinsically safe explosion-proof pressure transducer.
* It is unnecessary to install safety barrier on HM60 - ED intrinsically safe flameproof pressure transducer during system use.
* Please contact us for other special requirements and clearly indicate them in the order.
About Jiucheng
Qualification and Certificate:
Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.
Product Transportation:
We only choose the global express service providers. We will deliver the goods to you at the most efficient speed.
