XJC-100ZW Low Price 316 Stainless Steel Digital Differential Pressure Transmitter
Product Description
high quality different pressure transmitter
Strong corrosion resistance and good long-term stability .
Wide range of temperature compensation .
A variety of pressure interface thread forms and the connection modes .
With HART board or RS485 board .
316 Stainless steel
pressure transmitter for liquid testing
Technical Specification
Capacity | -0.1-100Mpa |
Accuracy | 0.1%F.S. |
Power Supply | 24VDC ; 12VDC ; 5VDC |
Rated output | 1.5-2.0mV/V |
Output Signal | 0/0.5/1.0/4.0/4.5/5.0/10.0v(3 wire system ) 420mA(2/3 wire system ) |
Load capacity (transmitter ) | Current mode≤500Ω ; Voltage mode≥100kΩ |
Safe over load | 150% |
Ultimate load limit | 250% |
Zero balance | 0.5%F.S. |
Full scale error | 1.0%F.S. |
Compensation temperature | 0~50ºC |
Temperature shift | 0.03%F.S./ºC |
Operating environment | -20~75ºC,≤85%RH |
Storage environment | -40~85ºC,≤95%RH |
Long stability | 0.2%F.S./Y |
Application | Air-conditioning refrigeration equipment etc . Fan /medical equipment /industrial equipment /office &electronics factory &chemical &pharmaceutical factory and other environment purification engineering /boiler air supply /mine ventilation and other fields etc. |
Electrical connection | 4-20mA two wires system current :red/1#:power positive E+;green /2#:Output current lout Three wires system current or voltage :red /1#:power positive E+;black /2#:power ground ;green /3#:output current lout or voltage vout |
Ordering guide
Mode | XJC-100ZW |
Shell material | 1:aluminum alloy 2:Stainless steel |
Output | 1:4-20mA (2 wire ) 2:4-20mA (3 wire ) 3:0-5v (3 wire) 4:1-5v (3 wire) 5:0.5-4.5v (3 wire) 6:0-10v (3 wire) 7:Switch output 8:Switch /voltage output 9:User requirement |
Capacity | KPa / Pa / Bar / PSI / Kg / cm² |
Thread sizes | Mark thread size : M201.5 / G½ Card set size : CD50 Frange size :DN25 Trachea mouth size :8 |
Leading wire | 1 : Cable +waterproof connection 2:Big hersman joint 3:Aviation joint (steel ) 4:Small hersman joint 5:Aviation joint (aluminum ) |
Additional function | A1: 0.1%F.S. A2: 0.25%F.S. A3: 0.5%F.S. A4: 1.0%F.S. V1:24VDC V2:12VDC V3:5VDC V4:±12VDC D1: LED display D2: LCD display D3: Point display D4: 0-100% instruction (bar code lable ) SI: intrinsically safe explosion-proof (iaCT4) SS: isolation of explosion-proof(dBT4 ) HT: HART agreement R4: RS485 communication Y: user requirement |
Buyer Feedback